Ana ci gaba da lalata na'urorin da ke amfani da zobe a lokacin aikin fesawa, kuma diamita na ramin yana faɗaɗa a hankali a cikin kimanin 0.01–0.02mm a kowace sa'o'i 100 na aiki. Don tsawaita rayuwar na'urar zobe da kuma tabbatar da daidaiton diamita na pellet a duk tsawon rayuwarsa, ana samar da sabbin na'urorin zobe a masana'anta tare da izinin lalacewa mara kyau na 0.04–0.08mm.
Don diamita na ramin 2mm mara iyaka, kewayon diamita na ramin masana'anta na masana'antu shine1.92–1.98mmMa'aunin 1.94mm da kuka samu yana daidai da matsakaicin matsakaicin wannan zangon, wanda kuma shine ma'aunin masana'anta na dogon lokaci wanda aka bi ta hanyarKamfanin Injin Abinci na Hongyang, Ltd.
Girman ramin 1.94mm ya samo asali ne sakamakon bin ƙa'idodin kula da ciki. Kafin kowane rukunin zobe ya bar masana'antar, Hongyang Feed Machinery yana amfani daInjin aunawa mai daidaitawa (CMM)don duba kashi 10% na matsayin ramukan, don tabbatar da cewa diamita na ramin yana cikin kewayon 1.92–1.98mm. An tabbatar da wannan ƙirar ta hanyar samar da miliyoyin injinan pellet na dogon lokaci a duk duniya kuma shine mafi kyawun hanyar amfani da ma'aunin zoben da suka dace da masana'antu.
| Tsarin Zane | Yankunan Wakilai | Ƙungiyar Haƙuri don 2mm Nominal Rami | Babban Amfanin | Babban Rashin Kyau |
|---|---|---|---|---|
| Fifikon Albashin Sakawa | China / Arewacin Amurka / Kudu maso Gabashin Asiya (Matsayin Masana'antu) | 1.92–1.98mm (Juriyar Mara Kyau) | Tsawon lokacin aiki na 30%–50% (awanni 1200–1500); Daidaiton pellet mai karko a tsawon zagayowar rayuwa (±0.1mm); Ƙarfin zobe mai girma, ba shi da saurin fashewa | Ƙarancin fitowar farko ga sabbin ma'aunin zobe (5%–8%) |
| Fifikon Aiki na Farko | Wasu Masana'antun Farar Hula/Ƙananan Injinan Turai | 1.98–2.04mm (Sifili/Haƙuri Mai Kyau) | Babban fitarwa na farko don sabbin ma'aunin zobe; Daidaita diamita mai kyau da fahimta | Tsawon lokacin aiki na ɗan gajeren lokaci (kimanin awanni 800); Faɗaɗa rami cikin sauri a matakai na gaba, rashin daidaiton pellet ya wuce ±0.2mm; Babban farashin pellet mai cikakken bayani |
Injinan ciyar da abinci na Hongyang sun zaɓihanyar ƙirar fifiko ta izinin sawadon taimaka wa abokan ciniki rage farashin samarwa na dogon lokaci da kuma cimma sakamako mai dorewa na samarwa.
Ta hanyar ƙara yawan zafin tururi yadda ya kamata zuwa85–90°C, tsawaita lokacin daidaitawa zuwaDaƙiƙa 30–45, da kuma daidaita gibin na'ura zuwa0.1–0.2mm, bambancin farko na fitarwa na sabbin mayukan zobe za a iya kawar da shi gaba ɗaya. Idan ana buƙata, ƙungiyar fasaha ta Hongyang Feed Machinery za ta iya ba da jagorar tsari ɗaya-da-ɗaya.
Ma'aunin Ƙasa na ƙasar SinGB/T 18674-2018"Zobe Dies don Ciyar da Pellet Mills" ya bayyana a sarari cewa ga diamita na ramuka ≤3mm, haƙuri shine ±0.03mm. Ma'aunin sarrafa ciki na Hongyang Feed Machinery (1.92–1.98mm) shinetsaurara fiye da ƙa'idar ƙasa, tabbatar da daidaito da amincin ingancin samfur.
Yi amfani da waniMa'aunin ciki mai daidaito 0.001mmko kuma wani ma'aunin toshe zobe na musamman don auna diamita a tsakiyar wurin aiki na ramin zobe. Auna aƙalla ramuka 5 a wurare daban-daban akan kowane ma'aunin zobe kuma a ɗauki matsakaicin ƙimar. Injin ciyar da abinci na Hongyang zai iya shirya ma'aikatan fasaha don kawo kayan aiki na ƙwararru zuwa wurin don aunawa daidai.
Injinan Abinci na Hongyang na iya daidaita fasahar sarrafa kayan aiki bisa ga halayen amfaninku kuma suna samar da mayukan zobe waɗanda suka dace da buƙatunkuMa'aunin juriya mai kyau na Turai (1.98–2.04mm), tare da zagayowar isarwa naKwanaki 3 na aiki.
Bayan ɗaukar ƙirar haƙuri mai kyau, rayuwar sabis na zoben mayafin za ta gajarta da kimanin kusanKashi 40%, cikakken kuɗin pelleting (kudin zobe a kowace tan na ciyarwa) zai ƙaru da kusankashi 25%, taurin pellet zai ɗan ragu kaɗan, kuma saurin karyewar sufuri zai ƙaru da kusan2%–3%Muna ba da shawarar ku yanke shawara bayan kun yi la'akari da cikakken farashin zagayowar rayuwa.
Idan aka ɗauki zoben rami mai diamita na 2mm a matsayin misali, kwatanta cikakken farashin zagayowar rayuwa:
Amfani da zoben Hongyang Feed Machinery na dogon lokaci zai iya taimaka muku rage farashin pelleting mai cikakken inganci da kusankashi 25%yayin da ake samun ingantaccen ingancin pellet.
Idan kuna da wasu tambayoyi game da diamita na ramin zobe ko hanyoyin amfani, da fatan za ku iya tuntuɓar ƙungiyar ƙwararrunmu ta fasaha:
Jagorar inganta tsarin pellet kyauta
Ma'aikatan fasaha suna amfani da kayan aikin ƙwararru wajen auna diamita na ramin da ke wurin
Samfuran zoben kyauta tare da ƙa'idodi daban-daban na haƙuri don gwajin kwatantawa
Kafa ƙa'idodin haƙuri na musamman ga abokan hulɗa na dogon lokaci don tabbatar da daidaiton wadata
Lokacin Saƙo: Mayu-26-2026
